How to Custom Fit Your Firearm in a Customer Fit Negrini Case

Negrini Custom Fit Cases are trusted by shooters and hunters who need lightweight, secure, and travel-ready firearm protection. Whether you’re fitting a handgun, shotgun, or rifle, the included foam insert system allows you to custom-fit your case to your exact firearm configuration – no gunsmithing required.

Here’s how to custom fit your Negrini case in a few simple steps.

What Comes With Your Custom Fit Case

Each Negrini Custom Fit Case includes:

• A precision foam insert (removable)
  
• A marking pen
  
• A razor knife
  

Additional inserts are available for purchase if you’d like to configure your case for multiple firearms or layouts.

Step 1: Plan Your Layout

Start by placing your unloaded firearm(s) and accessories on top of the foam insert to test the layout. Take time to:

• Balance the layout for weight distribution
  
• Avoid pressure on sensitive parts like triggers, scopes, or sights
  
• Leave room for magazines, holsters, or optics if needed

Tip: Ensure the case will close cleanly without compressing parts like slide releases or turrets.

Step 2: Trace Your Firearm

1. Remove the foam insert from the case.
   
2. Using the included marking pen, trace around each item you plan to store.
   • Hold the item steady while tracing
     
   • Keep the pen as vertical as possible for an accurate outline

Step 3: Prepare Your Razor Knife

Use the provided razor knife to cut out the traced sections.

Important:

• Ensure the blade is long enough to cut all the way through the foam
  
• Always cut at a 90-degree angle to ensure a straight, vertical edge. This prevents slanted cuts that can cause poor fit or loose storage.
  

Cut slowly and with steady pressure. If you’re unsure, make a light pass first and go deeper with a second cut.

Step 4: Remove the Foam

1. Once the shape is cut completely, carefully pull out the foam section.
   
2. Remove any remaining scraps or loose edges.
   
3. Test-fit your firearm.
   • If the fit is too tight, trim small sections incrementally.
     
   • If the fit is too loose, you can use extra foam pieces to snug it up.

Step 5: Reinsert and Load

1. Place the fitted insert back into the case shell.
   
2. Load your firearm and accessories into the custom-cut sections.
   
3. Close and lock the case using the integrated steel combination locks.

You now have a secure, custom fit that holds your firearm firmly in place during travel or storage.

Final Notes

• Don’t overthink the process – function and security matter more than perfect lines.
  
• If you ever want to reconfigure your layout, replacement inserts are available.
  
• The process is the same for all Negrini Custom Fit Cases, regardless of firearm type or model.

Need Help?

If you’re unsure which insert fits your case model or need advice for layout planning, contact our team. We’re happy to help guide you through the setup.