TCS Firearm Cleaning Solvent – Step 1
TCS Tactical Firearm Cleaning Solvent is a superior solvent in every way. It is odor-free, safer and easier to use, and more effective. It is designed for Law Enforcement, Military, Shooting Enthusiasts, Gunsmiths, and Armorers and it is Proudly Made in The USA.
This gun cleaning solvent easily removes carbon and fouling by penetrating down to the surface of the metal and displacing dirt. Unload and inspect firearms before cleaning. Metal parts may be covered or soaked in the TCS solvent.
Remove parts from the solvent and brush clean with an armorer’s brush. 0000 steel wool and this gun cleaning solvent may be used, with caution, to remove heavy deposits on metal surfaces.
Wipe parts clean with a disposable cloth/paper towel or blow off with compressed air. Repeat if needed.
Oil parts to preserve the finish and prevent corrosion.
Bore Cleaning:
- Saturate patch with TCS gun cleaning solvent, using a TCS Jag, push the patch down the bore. Brush if needed.
- Repeat Patching with TCS solvent.
- Use TCS Jag and TCS Bore Paste to remove copper fouling from the bore.
- Patch bore with a patch saturated in TCS solvent.
- Dry patch to remove the solvent.
- Patch with TCS Ultimate Firearms Lubricant to preserve bore and prevent corrosion
Features
- Fast and Effective
- No Odor
- Works on all Gunshot Residue
- Parts can be soaked with solvent.
Bore gun cleaner available in: 1oz, 4oz, 8oz, 32oz, 1 gal